Concrete Driveways in Liberty Lake, WA
New driveways, replacements, extensions and RV pads, done to Liberty Lake's standards. Raven Buildings pours residential concrete driveways in Liberty Lake and the surrounding Spokane Valley area. We handle the tear-out, base, forming and finish, plus the city approach permit when the work reaches the street.
Call 509-350-2016 or request a free quote.
What a concrete driveway costs (2026 published ranges)
-
HomeGuide: $6–$15 per sq ft installed; a 400 sq ft (single-car) driveway runs about $2,400–$6,000 (1)
-
Angi: $8–$20 per sq ft; plain concrete about $6–$8, stamped/decorative $12–$18 (2)
-
400 sq ft (1-car): $2,400–$6,000
-
600 sq ft (2-car, short): $3,600–$9,000
-
900 sq ft (2-car, longer): $5,400–$13,500
The size table multiplies HomeGuide's range by the area shown. Tear-out, grading, extra thickness for RVs and decorative finishes change the final number.
Liberty Lake rules that shape your driveway
Liberty Lake's engineering standards and development regulations set clear rules for driveways that meet the street:
- Approaches follow the City's "Cement Concrete Approaches" standard plans. The driveway must be long enough that a parked vehicle doesn't stick into the road, sidewalk or pathway, and it needs adequate sight distance (3).
- Width limits. Residential approaches are generally capped at 20 feet for a two-car and 28 feet for a three-car garage (3).
- In the River District, driveway aprons must be concrete where required and must meet ADA sidewalk and pathway standards. That area also has its own driveway-width rules (4).
- Right-of-way permit. Any work in the City right-of-way, such as cutting the curb, replacing the apron or crossing the sidewalk, needs a Right-of-Way/Approach Permit from Community Development. Apply at 22710 E Country Vista Dr (509-755-6704, permitcenter@libertylakewa.gov). Applications include drawings and proof of insurance, and starting work before the permit is issued means double fees (5).
We prepare the drawings and pull the right-of-way permit as part of the job.
Built for freeze-thaw
Liberty Lake sees hard freezes and thaws all winter. A driveway lasts when the work underneath is right:
- Compacted gravel base over stable subgrade, with the soft spots dug out
- Proper thickness. Thicker where trucks, trailers or RVs will park.
- Reinforcement and control joints spaced so cracks happen where we want them
- Drainage away from the garage and foundation
- Curing and sealing to protect against de-icers
Services
- Driveway replacement (tear-out and haul-off)
- New driveways for new construction
- Extensions and side pads
- RV and trailer pads
- Approaches and aprons in the right-of-way
- Walkways, patios and steps to match
Building a shop at the end of the driveway? We also pour shop slabs and erect steel buildings. Got a sloped lot? Ask us about concrete retaining walls as part of your concrete flatwork project.
FAQ
How much does a concrete driveway cost in Liberty Lake? Published 2026 ranges run about $6–$15 per sq ft installed (HomeGuide) or $8–$20 (Angi), depending on finish and site prep (1, 2).
Do I need a permit to replace my driveway in Liberty Lake? If the work touches the City right-of-way, such as the approach, apron, curb or sidewalk, yes. You need a Right-of-Way/Approach Permit (5).
How wide can my driveway approach be? Generally 20 ft for a two-car garage and 28 ft for a three-car garage under the City's standards (3).
Can you add an RV pad? Yes. We spec extra thickness and base for heavy vehicles.
Get your driveway quote
Call 509-350-2016 or request a quote. See all concrete flatwork services.